Ford Duratec 2.3 16v H Beam PEC Steel Connecting Rods Kit Endurance Racing Spec

Ford Duratec 2.3 16v H Beam PEC Steel Connecting Rods Kit Endurance Racing Spec

DESCRIPTION

 

PEC Steel Connecting Rods Endurance Racing Spec Ford Duratec 2.3 16v H Beam2.3 Duratec With Altered Big End Length.

 

PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp on most 4cyl engines) and on the ARP 2000 series 3/8 bolts normally provided & have an 8,500 RPM safe operating limit (engine specific).

 

In some cases, we reccomend using the ARP custom age bolts available from us.

 

This increases the hp threshold to 250hp per cylinder and raises the RPM limit to 9,000 however as every engine is different, these numbers are not guaranteed for every configuration.

 

Prolonged high RPM's for drifting, or sudden bursts of torque for drag racing (as two examples) will warrant the use of the custom age bolts to help retain the clamping force between the big end cap and the connecting rod.

 

PEC's own in house design facilities are able to create many different components but for nearly 10 years now, it's our connecting rods that have helped set us apart from the competition in terms of availability, ease of fitment and size of range. 

 

Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems.

 

H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength.

 

Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required.

 

PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike and their success record speaks for itself.

 

C/C: 154.80mm

Small End Dia: 21.00mmSmall

End Width: 18.00mm

Big End Dia: 53.01mm

Big End Width: 21.80mm

    536,00£Preis
    Workshop fitted
    Rate UsDon’t love itNot greatGoodGreatBrilliant ServiceRate Us

    ©2020 OC Motorsport LTD All Rights Reserved 2007.

    Proudly created By TEAMOC© 

    • Facebook
    • Twitter
    • YouTube
    • Instagram
    • White Facebook Icon
    • White Instagram Icon